- Home
- Why Starlink Is Slow
Why is my Starlink so slow?
Starlink that crawls in the evening, lags on video calls, or never matches the speeds you expected usually has one of a handful of causes. Here is how to tell which one is yours — and what actually helps.
Published Sep 20, 2026 · Updated Nov 6, 2026
Symptom → cause → fix (quick reference)
Match what you are seeing to the likely cause, then jump to the section below for the full explanation.
| Symptom | Likely cause | Fix |
|---|---|---|
| Slow only in the evening | Peak-hour congestion in your cell | Schedule big downloads off-peak; check plan priority |
| Drops & stalls every few minutes | Obstructions clipping the sky view | Run the obstruction check; relocate or raise the dish |
| Slow on Wi-Fi, fine when wired | Router or Wi-Fi coverage, not the link | Reposition, add mesh, or use bypass mode |
| Suddenly slow after heavy use | Deprioritized past a data allotment | Check usage & plan tier; wait for cycle reset |
| Upload always weak | Upload is inherently limited (~15 Mbps) | Go wired for uploads; set expectations; weigh a WISP |
| Slow during storms | Heavy rain/snow on the dish | Usually brief; clear snow buildup, otherwise wait it out |
Evening congestion (the most common cause)
If Starlink is quick most of the day but drags from dinnertime onward, you are almost certainly hitting peak-hour congestion. Capacity is shared among everyone in your Starlink cell, and the busy window — roughly 5 to 11pm — is when the most people are streaming, gaming and calling at once. Speeds dip during those hours and recover overnight and through the daytime. There is no setting that beats congestion, but your plan matters: Residential has higher network priority than Roam, and Residential Lite is weighted slightly below standard Residential, so a plan mismatch can make a congested evening feel worse. The practical move is to schedule big downloads, backups and updates for off-peak hours, and to understand that some evening slowdown is normal in a busy area.
Obstructions (short drops that read as "slow")
A connection that stalls or drops for a few seconds every few minutes often gets reported as "slow," but the real culprit is obstructions. Even a partial blockage of the sky — a branch, a chimney, the edge of a roofline — causes packet loss and retransmits that feel like sluggishness and break up streams and calls. Open the Starlink app's obstruction map / Visibility and let it scan your sky; red areas mark the problem. The cure is a clearer spot or more height, not a reboot. Our troubleshooting guide walks through diagnosing and clearing obstructions in detail.
Wi-Fi vs the satellite link
One of the most common mistakes is blaming Starlink for what is really a Wi-Fi problem. The dish can be delivering full speed while the signal never reaches the far bedroom. Diagnose it the simple way: test wired (a device plugged into ethernet) and then on Wi-Fi in the same place. If both are slow, it is the link or congestion. If only Wi-Fi is slow, the fix is on your side of the router — add mesh nodes for distant rooms, move the router higher and more central, or for the most control put the Starlink router in bypass mode and run your own router or mesh. See our accessories picks for gear that works well behind a Starlink.
Deprioritization after a data allotment
On Roam and Priority tiers, each plan includes an amount of high-priority data. Once you pass it, your traffic is deprioritized for the rest of the billing cycle — it yields to higher-priority users, so speeds can fall sharply during busy hours while staying usable when the network is quiet. This often looks like Starlink "suddenly getting slow" after a heavy stretch of use. Check your usage and plan tier on Starlink.com, and see plans and on-the-go options for how the tiers and their data allotments differ. Plans and limits change, so confirm the current details at the source.
Weak upload is normal
Even a healthy Starlink has modest upload — averaging somewhere around 15 Mbps — because upload is a hard limit of the system, not something a router or accessory can raise. If video calls, cloud backups or large file uploads feel slow while downloads are fine, this is why. Make the most of it by going wired for upload-heavy tasks and running big uploads outside peak evening hours. If strong, steady upload is important to you, it is worth comparing a local WISP, where upload is often far better. These are approximate figures that shift over time — check Starlink.com for current numbers.
Quick fixes worth trying
Once you know the cause, these are the practical moves — in rough order of how often they help:
- Reboot the dish and router to clear transient glitches (unplug 30 seconds, or app → Settings → Reboot).
- Update firmware — make sure the app and dish are on the latest version.
- Reposition for a clear view of the sky and raise the dish if trees or a roofline are clipping it.
- Move or upgrade your router — reposition it centrally, add mesh, or run bypass mode with your own gear.
- Schedule big downloads off-peak (overnight or midday) to dodge the evening congestion window.
- Check your plan and usage on Starlink.com to rule out deprioritization and confirm you are on the right priority tier.
Frequently asked questions
Why is Starlink slow at night? +
Evening is the busy window — roughly 5–11pm — when most people in your Starlink cell are online at once. Capacity is shared per cell, so speeds dip during those hours and recover overnight and through the day. There is no trick that beats congestion itself, but Residential plans get higher priority than Roam, so a plan mismatch can make it worse. If evenings are unusable, it is worth weighing a local WISP where one is available.
Is Starlink slower than advertised? +
Download speeds usually land in the advertised range most of the day, but two things surprise people: evenings are slower because of congestion, and upload is inherently weak — often around 15 Mbps on average even when download is healthy. Advertised figures are typical ranges, not guarantees, and they vary by location and time of day. Always check Starlink.com for current numbers, since plans and performance change.
Does weather slow Starlink? +
Heavy rain, wet snow building up on the dish, and dense cloud can cause brief slowdowns or short drops, but weather is rarely the main reason for persistently slow speeds — congestion and obstructions are far more common. See our weather and Starlink guide for what actually affects the link and what does not.
How do I tell if it is my Wi-Fi or Starlink that is slow? +
Run a speed test twice: once on a device plugged into ethernet, and once on Wi-Fi in the same spot. If both are slow, it is the satellite link or congestion. If only Wi-Fi is slow, it is your router or coverage — add mesh nodes, reposition the router, or run bypass mode with your own router. See accessories for mesh and router picks.
Why did my Starlink suddenly get very slow after heavy use? +
On Roam and Priority tiers, once you pass the plan's high-speed data allotment you can be deprioritized for the rest of the cycle — your traffic yields to higher-priority users, so speeds fall sharply at busy times. This is by design, not a fault. Check your usage and plan tier on Starlink.com, and see plans and on-the-go options for how the tiers differ.
Will rebooting fix slow Starlink? +
A reboot clears transient glitches and is always worth trying first, but it will not fix congestion, obstructions, a data cap, or a Wi-Fi coverage problem. If a reboot helps for a few minutes and then it slows again at the same time each evening, that is congestion, not something a restart can cure.
Can I improve Starlink upload speed? +
Not by much — upload is a hard limit of the system, averaging around 15 Mbps, and no router or accessory changes that. You can make the most of what you have by going wired for upload-heavy tasks (video calls, backups, cloud uploads) and scheduling large uploads outside peak evening hours. If you rely on strong upload, compare a local WISP, which often has far better upload.
Is Residential Lite slower than Residential? +
Slightly. Residential Lite is weighted a notch below standard Residential for network priority, so during congested evening hours a Lite plan can feel slower than full Residential in the same area. During the day the difference is usually small. Check Starlink.com for the current plan tiers and what each one prioritizes, since these change.
New to Starlink? Grab a free month.
New customers get one month of service free through our referral — applied to the second month.
See the Free-Month Offer →When you choose local, you're supporting local
Support your local internet provider whenever you can, and save Starlink for where it's genuinely the only reliable option. Your money stays in your community — funding local jobs, local businesses, and the people who live and work in the same places they serve. Local and regional providers also usually beat satellite on latency and support where they reach.
Check who already covers your address before you buy a dish: the WISPA “Find a WISP” directory, the FCC Broadband Map, or a quick search for your county + “internet providers.” In our areas, On-Ramp Indiana (Indiana) and ETHX (Southwest Florida) offer local fiber and fixed-wireless: